Fix HP Printer Error e4 with Reliable Solution

There is a time when you face HP Printer Error e4 due to paper jam issue and are unable to get rid of by the own. Once you get such an error, your printer doesn’t feed any pages to print and it makes you too much infuriating as some documents are too necessary to take printout. In case you are not skilled enough to eradicate such an error code, then you are suggested to obtain HP Printers Support for instant help as it is reliable and trustworthy. Moreover, you can continue reading this post as here you can find the most suitable troubleshooting guides to fix this in relevant manner.

Fix HP Printer Error e4

Reasons of Getting HP Printer Error e4

Here are the possible reasons which are quite common to get into such a problematic situation:

  • Due to jammed paper inside the input cabinet
  • Paper may be jammed in the output tray
  • The carriage might not move freely
  • Due to miscommunication between your printer and computer

So, these are some causes that may affect your printer to respond while trying to print and appears an HP Printer Error e4. Don’t panic! In this blog, you will also get effective ideas to annihilate it. So, simply feast your eyes over here.

Reliable Solutions to Fix HP Printer Error e4

Go through the below-mentioned instructions one-by-one carefully to make the error code E4 disappeared from the root in a couple of second. Have a glimpse underneath the given points:

Solution 1: Look-out For Jammed Paper

First and forecast, you need to check-out for any jammed paper if it is there inside the printer. The paper can be jammed in multiple areas of your printer. So, you have to check every corner and if you find it clear the jammed paper immediately. Once you clear the jammed paper or fix paper jam issue in your printer, you will no longer to experience HP Printer Error e4 when printing the document. In short, with no hassle you can print anything that you are required.

Solution 2: Ensure the Carriage Moves Freely

Next step you should take for exterminating this issue is to ensure that there is no foreign object or paper in the printer. Just, follow the below-points to ensure it:

  1. First, turn your printer ON if it is not already ON
  2. Now, open the exterior door and then open the Printhead access door
  3. Wait a while until the carriage is sluggish and silent
  4. Now, with the printer turned-on, disconnect the power cord from the rear of the printer
  5. Use a flashlight to check for any paper or object that might be restricting the carriage and then remove if you find any paper or object stuck inside the printer
  6. Now, go inside the printer with the help of printhead access door and then manually move the carriage
  7. Eliminate any loose paper or obstructions you find
  8. At the end, make sure that the carriage can move very frequently across the width of the printer
  9. After that, close the printhead access door and then close the exterior door
  • Reconnect the power cord to the rear of the printer and then turn it ON
  • Now, try to print to check the issue is solved or not

If yet the same problem persists, continue to the next procedure.

Solution 3: Clean the Paper Rollers

Use an automated utility to clean the paper feed rollers inside the printer and then try to print anything. If you yet face the same error, jump to the next solution.

Solution 4: Clean Ink Smears

Cleaning ink smears can help to clear the jammed paper and also optimize the print quality. So, clean the ink smears sooner and then try to print.

Grab HP Printer Troubleshooting Guidelines from Experts

Don’t feel blue! If you are still encountering the HP Printer Error e4 as we are working as a team and all are well-educated and highly experienced. So, when you make connection with us via calling on 24X7 helpline number, you can get effectual HP Printer Troubleshooting steps in a cost-effective way. So, give a ring as soon as possible and stay united with them until your problem gets sorted out from the root.

Why my HP Printer is Offline? How to Bring it Online?

Windows has a printer setting where you have to set the HP printer to Online if it is Offline. You will see an option “Use Printer Offline” in the printer setting, if there is a check-mark before it, you can’t print anything. Therefore, it is highly advisable to you to go in that settings and check it. Give un-check if it is tick-marked and then try to print again. You will surely print your important document without any obstacles. Moreover, HP Printer Offline Fix will be done with an ease when you read this article. It is not necessary that this is the only reason for your offline issue. There could be more faults due to which your HP printer displays an Offline while you print the document.

Why my HP Printer is Offline

Methods to Fix HP Printer is Offline Issue

We have collected all the basic methods to troubleshoot HP Printer Is Offline issue. Let’s have a look at once and go through them one-by-one consciously by making sure that you don’t skip a single step.

Method 1: Uncheck the Post “Use Printer Offline”

First and forecast, you are required to do is to uncheck the box saying “Use Printer Offline” as until you don’t do it your printer won’t print. Follow the below instructions to do the same:

  • Click on the “Start” button and then tap on “Devices and Printers” folder
  • Next step is, place a right-click on the icon of Hewlett-Packard printer. It may be categorized with HP or Hewlett-Packard as part of the device name. If it does not, you may have to click the printers in the window without manufacturer names to view the lists of printers. At the bottom of the window, next to “Manufacturer” it says “HP” or “Hewlett-Packard.” Hence, click the “See What’s Printing” option
  • Now, tap on the “Printer” menu in the window to open it and uncheck “Use Printer Offline.” After doing that, your HP printer will begin print job anytime without any hassle

Method 2: Check the Cable Connection

Due to lack of communication between your printer and computer, your printer says offline. That’s why, it is very much important to check out the USB cable and ensure it is properly connected.

Method 3: Cancel All Pending Print Jobs

If there is any pending print job in the queue, cancel them immediately with the help of given steps:

  • Go to the menu “See what’s printing” and give a right click on it. And then click on “Cancel” button to cancel any print jobs if present
  • After removing the print jobs, select “Use Printer Online” again
  • In case, any print jobs yet present, then restart your printer as well as computer system both

Dial Helpline Number if Still HP Printer Says Offline

After performing all these above mentioned methods, your HP Printer Says Offline yet, then don’t pull your hairs. Contact HP Support to get troubleshooting help from experts. So, contact with us via placing a call on helpline number and obtain fruitful assistance at doorstep.

Steps to Fix HP Printer not Activated Error Code 20

If your HP printer is not properly configured on your computer, HP Printer not Activated Error Code 20 appears during print job. While printing anything, such an error code suddenly display on the computer. Well, in order to cope-up this error, first you have to be assured that the HP printer is setup correctly on your system, and also there should be no damaged or corrupt settings on your PC as these can be the reason for printer is not activated while printing. If you are non-tech person and don’t know how to bring your HP printer in working mode, then simply contact HP Support Phone Number to get immediate help from certified experts.


Fix HP Printer not Activated Error Code 20

Causes of HP Printer not Activated Error Code 20

There may be various reasons due to which you encounter this printer not activated problem. Check-out the below noted points:

  • The printer on you are working is not set as default one on your system
  • Due to missing of printer driver
  • Confliction in device manager
  • Windows registry errors

These are the basic cause of occurrence this error code 20 when printing any document with HP printer. There are couple of solutions you need to try out to immediately annihilate the issue. Lets’ begin:

Desired Solutions to Fix HP Printer not Activated Error Code 20

Before starting with the troubleshooting guidelines, you have to ensure that your HP printer is working well. You can check it by printing a self-test page. Apart from this checking, you need to be also assured that the USB cable is appropriately connected from the printer to your computer. Once you have successfully completed these tasks, then you can now apply these methods to resolve the error quickly.

Method 1: Make Sure the HP Printer That You Are Using Is Set as Default

The printer error 20 can be appeared when you send the document to the wrong printer to print. So, make sure the printer you are working is set as default. To check it, go through the below points:

  • First, click on “Start” button and then click “Printer and Faxes” option to open the Printers folder
  • Look towards the Printers folder, and if the desired printer icon is missing, go ahead to the second provided method
  • However if the desired icon is present, see if it has a check mark next to it which indicates that it is set as the default printer
  • If the check mark is missing next to the desired printer icon, then give a right-click on the printer and click onto the “Set as Default Printer” option
  • Once you have done this above process, right-click the printer icon and then click on “Print Test Page” to print a Windows self-test page
  • If the page prints successfully, close all the windows and print hassle-freely with the application that you were using before
  • However if Windows test-page doesn’t print, apply the next method listed below.

Method 2: Reinstall the USB Composite Device from Device Manager

To perform this task, go through the points listed below:

  • First click on “Start” button and then open the Run dialog box
  • Now, type “devmgmt.msc” into the Run window and then press “Enter” to open the Device Manager Window
  • Now, click the plus sign (+) next to Universal Serial Bus Controllers
  • Right-click on “USB Composite Device”, hit “Uninstall” and then tap “OK”
  • After that, disconnect the USB cable from your Computer and connect it again
  • Follow the on-screen prompted instructions in the Found New Hardware Wizard to install the right drivers
  • Now, place a right click on the printer icon and then tap “Print a Test Page” to print a Windows self-test page and ensure the printer is working well
  • If you get a printout, then close all windows and try printing without any hassle from the application you were previously been using

Method 3: Reinstall the HP Software

If the above steps are not effectual for you to eradicate the problem, then now you are required to uninstall and reinstall the HP software. It may help you out in recovery your corrupt HP printer.

Dial HP Support Phone Number If You Want One-Stop Remedy

Even after completing these above procedures one-by-one properly, still getting the same error code on PC while printing the document? If yes, then don’t feel blue! We are available 24/7 to assist you. You can also get help to resolve HP printer not activated error code 30. So, hurry up! Give us a call as soon as possible and take handy solution in an efficient way within your budget.

Fix HP Printer Print Quality Problem in Simple Steps

In the latest technology world, HP is a world-class brand manufacturing many electronical devices which are beneficial for the users. Including its electronic devices, printer is the one having great quality of printouts with high speed. HP printer has various models and all are in your budget. So, if you are planning to buy printing machine this Diwali, then it is highly recommended to purchase HP printer as you will get extra offer on this product. While some hurdles may confront for the first time use. One most common printer issue that is Print Quality Problem, users usually complain and raise the voice of assistance to troubleshoot. So, here you need to obtain real and trustworthy HP Support from well-qualified and trusted technicians. They will give you the reason why the print quality is not up to the mark and how to eradicate the problem in a very efficient manner.

Fix HP Printer Print Quality Problem

Desired View Points To Fix HP Printer Print Quality Problem

If you find your printout is not clearly be shown, then try out the following steps one-by-one. With these guidelines, for sure you will get the printout in your hand at high quality. Therefore, without any confusion, give a look here:

  • Use The Genuine Ink Cartridges

The printer manufacturer always endorses its users to use authentic ink cartridges for the top-notch quality of printing solution. In case anyone is using third party’s manufactured or refilled ink, the quality of the printed paper may not be good. Therefore, make sure you are using real ink cartridges for printing.

  • Check The Paper You Have Adjusted Into The Input Tray

Follow these instructions to ensure that the paper is suitable for printing. In case it is inappropriate or unreal, then reload new paper inside the paper tray. Give a click on the noted lines:

  1. Load the stack of white blank paper with accurate size into the tray
  2. Also load the clean and wrinkle-free papers into your HP printer
  3. To get the high quality of printouts, you are suggested to use the plain paper or photo paper by the printer manufacturer
  4. It is advisable to store the stack of paper on an even surface and away from moisture. Load ten to twenty sheets of white blank paper into the tray only and store the other sheets inside a resalable or airtight plastic bag
  5. Using a damaged, unsupported, or inappropriate paper may leave smudges in a printout. So, always prefer to use a distinct paper for printing
  • Double-Check Print Settings In Windows

Check the print settings in your Windows operating system and give assurance that the print settings are configured accurately. Check out the settings via provided steps:

  1. Go to the printing software on your Windows and then give a click on “File”
  2. Now, choose “Print” option to launch the print window
  3. Open the dialog box from Properties
  4. Consider the following settings to get the printouts in correct format and clicking “OK” to confirm changes
  • Paper Type: If you are printing on a photo paper, choose the respective paper type as per your need.
  • Print Quality: To improve the quality of printouts, choose Best quality setting or mode. To take printouts at high speed and with an acceptable quality, you may choose Normal. Well, you would also have a Draft mode to lower quality but improve speed of printing.
  • Paper Size: Choose the right paper size that is A-4 in the software.
  • Black and White: In case you want to take printouts only in monochrome, select the option “Grayscale”
  • Replace Ink Cartridges If Needed

In case your printer is running out of ink, then a warning message pops-up on the computer screen which indicates you to refill the ink or replace the cartridges. Therefore, replace the ink cartridges immediately but only with the manufacturer one not third party.

  • Clean The Cartridges

If the printout has smeared text or getting an affected printouts, then there may be ink cartridges are clogged. In that case, you need to clean the cartridges appropriately with the use of wetted tissue.

Contact HP Printer Customer Service for Effective Answer

If you yet come across HP printer print quality problems, get in touch with our supportive professionals via calling at HP Printer Customer Service Number. This is the 24/7 online service proffered helpline number where candidates get 100% satisfaction solution within their budget also in limited time.


Resolve HP Laptop Error Code 601 With Easy Steps

HP is a well admired brand that develops striking range of electronic devices such as desktops, laptops, printers, monitors, and many more devices. HP machines such as HP laptops are widely famous among the clients due to their authenticity, style and excellent performance. Regardless of being a reliable device, the HP laptop is not always free from technical glitches. Most of the users protested that they are dealing with HP Laptop Error Code 601 quite regularly. Whenever you saw this error on your laptop’s screen, then you should immediately call on HP Phone Number and take assistance from deft technicians to resolve this error.


Resolve HP Laptop Error Code 601

The main reason behind this error to crop up is the internal battery problems. Whenever this error comes across, it shows that the battery storage capacity is very low and needed to be replaced with a new one.

Furthermore, before buying a new battery why don’t you try to resolve this error from the system itself? If you are unaware of the steps to resolve this error, then you need to follow the below points till last.

Straightforward tips and tricks to fix the HP PC Error Code 601

Re-Insert the Battery

The easiest and swift way to get rid of this error code is to simply remove your Laptop’s battery and remove the battery and after some time re-insert the battery.

When done. Restart your system and check whether error code 601 is still there, then you should move to another step.

Run Battery Test

You should perform a battery test whenever you found something unusual with your Laptop’s battery. In order to check your computers for battery performance to optimize usage, you should run a battery test.

Run PC without Battery

By running the PC without battery, you can eradicate HP PC error 601. After doing so, you have to boot your computer and check if the error still exists or not.

Replace the Laptop’s Battery

If the above mentioned methods are helpless in front of you, then it is time to replace your Laptop’s battery. Make sure that your replaced battery is new and hasn’t fallen. This will surely prevent the further use of damaged batteries that can affect the performance of your computer.

Hopefully, after following the above steps, you are able to resolve HP Laptop Error 601. If you need further assistance, then you can make contact with HP Laptop Support Phone Number. In order to make connection with tech experts, you need to put a call on helpline number.

Steps to Resolve HP LaserJet Pro M1132 Error e8

When the e8 error comes up on the HP LaserJet pro m1132 printer starts flashing, it means that the problem is with the scanner carriage. When the carriage movement stalls, the printer directly responds by sending an e8 error light. So, given below are the simple steps that you can follow to eradicate this issue instantly. For any sort of difficulty, contact our experts through HP Printer Number. They will sort out your problem and give you the best advice to overcome it.


Resolve HP LaserJet Pro M1132 Error e8

What are the reasons for this error?

The reason of the error could be software based, or maybe there is a break in the scanner motor connection. Or the problem maybe the motor itself and lastly the mechanism may have stalled. All these problems had ready answers. Reimage the repair tools for the software and manual repairs or maintenance for failure given to the mechanical parts of the printer.

Though, the most possible culprit is staged mechanically because of the expected wear and tear of the parts. Or the dust has accumulated on the sensitive mechanical arms and rubber rollers that leads to the limited movement and stalling eventually. Cleaning and maintenance will possibly resolve the issues behind the e8 error light signal.

What are the steps for cleaning and maintenance procedure?

Perform the cleaning and maintenance procedure given below.

  • Keep the HP LaserJet pro m1132 printer over a strong workbench, perhaps in a well-lighted and ventilated area. The things that are required are a screw driver, a clean rag and alcohol.
  • Raise the main printer cover and the smaller inner over.
  • Detach the ink cartridge lever, grip the handle and pull it out.
  • Search for the printer roller, unclip from the holder.
  • Keep the roller and clean it with a rag damped with alcohol, let it to dry. This requires thorough cleaning to remove dust, accumulated ink and other matters that coat the surface.
  • Put the roller back to the printer holder, proper reinstallation should produce a distinct click as the roller sets into position.
  • Keep the printer sideways and search for the jack at the back. Take away the two nuts and pull the jack out.
  • Clear the black printer roller inside and all the other parts, then keep it back the jack using the nuts that was earlier taken out.
  • Install the ink cartridge again. Back lock the lever down to keep it securely.
  • Shut the printer and power up. If the error light is still blinking, open-up the scanner cover and search for the drive gears.
  • Put oil on the drive gears and close the scanner.
  • Restart the printer again.

The process given above should have fixed the issue of the HP LaserJet pro m1132 e8 error lights. Cleaning and periodic maintenance is what is needed to prevent the issue from recurring in the future. Keep in mind that the scanner carriage slides along rails and if not correctly maintained it stalls resulting in the e8 error lights. The same thing happens to the rubber rollers that becomes unproductive if the friction is not upheld due to a dirt coated surface.

Always keep in mind that printers have mechanical parts that need to clean and maintain to work effortlessly.

For technical assistance, contact HP Support. Experts will help you in your problem. Call anytime for help.

Simple Steps to Fix HP Printer Error oxc19a0003

The error 0xc19a003e befalls in the printer if the system of cartridges of ink has failed. It is common in some of the HP printers such as HP Photosmart D7560, B109A, C309g, and C6283. If you have any idea about printers, you will notice that they are all independent ink heads showing the fact that the problem holds in the printer head or even related to the print head.

The HP printer error oxc19a0003 normally occurs because of the ‘Ink system failure’, ‘Printer failure’, ‘print head problem’ and other several reasons.

Some years ago, HP made printers with an independent ink head that gives us the comfort of printing to spend an ink cartridge. Once it is spent, one can replace the cartridge that is worn. This innovative technology has added another characteristic to the printer that is its cost.

Given here are the steps to eradicate HP Printer Error oxc19a0003. These are the simple steps that will help you to overcome the problem instantly. You can contact HP Printer Helpdesk Number instantly to apply all these steps to fix the problem.

Fix HP Printer Error oxc19a0003

What are the steps to fix HP printer error oxc19a0003?

  1. Reset your printer
  • First of all, you should disconnect the Universal Serial Bus or the USB cable from the back of the printer. Ensure that the printer is switched OFF.
  • Raise the printer cover to open it and carefully take out the cartridges from the printer.
  • Close the printer cover and wait for the message to arrive. Put ink cartridges to appear.
  • After that, detach the power cord from the rear of the HP printer and wait for a while.
  • Now, connect the power cord again. If in any case, it does not open automatically, turn it on, and hit the “ON” button.
  • Raise the printer cover and insert the print cartridges again to work correctly and then close the cover.
  • Connect the USB cable back again with the printer and attempt to print a document from the system.
  1. Clean the printheads

A) First of all, clean the print heads of the toolbox

  • Go to the “Toolbox” option.
  • Now, tap on the “Printer Services” tab.
  • Then hit the “Clean print heads” option and perform the step wise instructions on the screen to complete it.

B) Clean the print heads of the HP inkjet utility

  • Firstly, you must open the HP Inkjet Utility.
  • After that, tap on the “Clean” option and perform the step wise instructions on the screen to complete it.

Hope these steps help you to sort out your problem. If not, contact HP Printer Tech Support Phone Number and talk with the experts. They will guide you in each and every step and suggest you the best tips and tricks to avoid any further issues.